Particularly in the case of liquids for cooling circuits, continuous level measurements are frequently used.
In this way, safety-related changes in level can be determined more quickly and can be reacted accordingly. This system of continuous level measurement is of huge advantage. On the other hand, the signals from the sensors can be transmitted to the various output systems via BUS interface and can be retrieved there. On one hand, the results can be read directly by means of a measuring transmitter at the filling level sensor. These level sensors offer two different variations.
Anyone who needs a direct overview of the existing residual quantity of liquid will generally rely on finer level sensors, which allow a direct overview of the amount of remaining liquid by means of pressure, ultrasonic or radar level measurement principles. Thus, level control and level determination can be carried out without problems via such float switches. In general, two float switches are used, one operate as a minimum level switch and other as a maximum level switch. However, if this is not possible because of the nature of medium, for example, if the medium is so contaminated that it could hinder the magnetic level switch, float switches are often used. Magnetic level switch is mainly used to measure the level of liquids in many areas. Thus, industrial companies worldwide can take advantage of efficiency of Kobold level measuring devices and profit from the exact measurement of level. This applies to both liquids and bulk material, which can also be monitored by means of various level sensors. It allows many areas to be easily automated and thus managed more quickly and easily. In this way, the filling level of plants, tanks and silos can be either continuously or in samples checked.Īlso the use of modern float switches can be a good and simple solution to regulate the flow of fluids or to provide optimized refill requirements. Level of different mediums can be determined by differential pressure, hydrostatic sensor, ultrasonic sensor, pneumatic level measurement, float switch or by pressure measurement.įor every type of level measurement, Kobold offers suitable level gauges and level indicators, which can be easily integrated into various tanks and production systems. General level measurement can be carried out in various ways depending on the medium selected, size of tanks and the temperature and density of materials used. The filling of tanks and silos can be displayed at various points via various level indicators and can thus be monitored. The level within the tanks can be checked and controlled by means of various level sensors and level gauges. Take off (peel) the plastic ring of the counterweight before installation and insert the cable through the ring, then insert the cable through the conical part into the counterweight and set it with a moderate pressure.In industrial and commercial tanking systems, the level of the tanks must be monitored continuously in most cases. Instructions for use for the installation of the counterweight. The picture shows the connection scheme of auto-switch filling and emptying of water, which is an extension of the two basic functions. Instructions for use for automatic filling and automatic emptying. The electric pump stops when the water level reaches a level and if it exceeds this level it starts again to expel water. Instructions for use for the emptying operation.įor the draining operation connect the brown cable to the water pump and the black cable to a neutral cable, as shown in the picture (the blue cable must be insulated). The electric pump begins to fill with water and when the water in the tank reaches a level stops working. Instructions for use for the filling operation.Ĭonnect the blue control cable to the electric pump and the black wire to the neutral wire as shown in the picture to fill it with water (the brown wire must be waterproof).
The power cord terminal should never be inserted into water during installation.The length of the cable between the point of attachment of the article and the body of the article determines the water level.Connect the electric cable to the electric pump and then fix it inside the water tank.Set the counterweight on the power cable to control the level.Cable Length: Includes 2 meters of cable.This float switch, made in a clearly visible red color, has 2 meters of cable and counterweight, its main function being to start and stop the pump automatically depending on the water level of the water tower, tank The pool. Float switch with IP-68 degree of tightness, specially designed for clean water.
0 kommentar(er)
